Setting up your gaming monitor: Hz, VRR, G-Sync and FreeSync
This is one of the most common oversights we see: a 144 Hz or higher monitor connected to a modern gaming PC that is still running at 60 Hz because the setting was never changed in Windows. The hardware is there; it’s simply not being utilized. This guide covers the settings to check in order once the monitor is connected: the cable, the refresh rate, variable sync (VRR, G-Sync, FreeSync), the frame rate limit, and HDR. Allow about ten minutes.
Step 1: The right cable, in the right port
Before touching any menus, two hardware checks can prevent most problems.
- Connect the monitor to the graphics card, not the motherboard. The graphics card’s video outputs are grouped together lower down on the back of the case, in a horizontal row. The ports located at the top, near the USB ports, depend on the processor’s integrated graphics chip, if it has one.
- Use DisplayPort for a PC monitor. This is generally the connection that provides access to the monitor’s maximum refresh rate and unrestricted variable sync. HDMI also works, but depending on the version of the monitor’s and graphics card’s ports, the available refresh rate may be capped.
- Use the cable supplied with the monitor or a cable certified for the required bandwidth. An old, repurposed cable is a common cause of limited refresh rates, intermittent black screens, or flickering.
The maximum refresh rate for each port is indicated in the monitor’s manual: this is the reference to consult if in doubt.
Step 2: Set the refresh rate in Windows 11
The refresh rate, expressed in hertz (Hz), is the number of times the monitor refreshes its image every second. Windows does not always select the highest value by default.
- Open Settings > System > Display.
- Scroll down to Advanced display.
- If you have multiple monitors, select the correct one from the list at the top of the page.
- Under Choose a refresh rate, select the highest available value, then confirm.
If the expected value does not appear, check the cable and port (Step 1), the selected resolution (some monitors only reach their maximum refresh rate at their native resolution), and then the monitor’s own menu, where a high-refresh-rate mode or a specific DisplayPort version may sometimes need to be enabled manually. Also remember to update the graphics driver.
What about games?
A game may have its own refresh rate setting in its video options, especially in exclusive full-screen mode. After changing the refresh rate in Windows, check the graphics options of your usual games to make sure they are not stuck at 60 Hz.
Step 3: Enable variable refresh rate (VRR)
A PC does not produce a constant number of frames: it varies depending on the scene. When the graphics card sends an image while the monitor is in the middle of refreshing, a horizontal tear appears, known as tearing. Traditional vertical sync (V-Sync) eliminates this defect, but adds display lag and stuttering when the PC’s frame rate drops below the monitor’s refresh rate.
Variable refresh rate, or VRR, solves the problem differently: the monitor adapts its timing to that of the graphics card within a range defined by the manufacturer. G-Sync (Nvidia) and FreeSync (AMD) are the two commercial names for this technology.
| Name | Graphics card | Where to enable it |
|---|---|---|
| G-Sync / G-Sync Compatible | Nvidia GeForce | Nvidia app or Nvidia Control Panel, Display section “Configure G-SYNC” |
| FreeSync | AMD Radeon | AMD Software Adrenalin, Games tab, then Display |
| Windows variable refresh rate | All, if the monitor is compatible | Settings > System > Display > Graphics |
The steps to follow
- On the monitor: open its menu using the buttons or joystick and enable the FreeSync, Adaptive-Sync, or VRR option. It is sometimes disabled out of the box.
- With an Nvidia card: in the “Configure G-SYNC” section, check the activation box and select windowed and full-screen mode. Many FreeSync monitors work with a GeForce card in “G-Sync Compatible” mode over DisplayPort.
- With an AMD card: in Adrenalin, check that the AMD FreeSync switch is enabled for the monitor in question.
- In Windows 11: in the graphics settings, enable variable refresh rate. This setting complements the driver setting for games that do not natively support VRR; it only appears if both the monitor and graphics card are compatible.
If the option is missing, the cause is almost always one of these three: VRR is disabled in the monitor’s menu, it is connected to a port that does not support it, or the graphics driver is outdated.
Step 4: Limit the frame rate and finalize the settings
VRR only works within the monitor’s range. If the PC produces more frames than the monitor can display, variable sync no longer does its job and tearing returns.
- Set a limit slightly below the monitor’s refresh rate, by a few frames per second. The limit can be set in the game options if available; otherwise, use the graphics driver (frame rate limit in Nvidia, Radeon Chill, or frame rate limit in AMD).
- V-Sync: with VRR enabled and a properly set frame rate limit, in-game V-Sync can remain disabled. Some players enable it in the driver as well to handle rare frame rate spikes: both approaches are equally valid, so test which one suits you.
- Response time (overdrive): in the monitor’s menu, the intermediate setting is generally the best compromise. The most aggressive setting often creates halos behind moving objects.
- HDR: if supported, it is enabled in Settings > System > Display > HDR. Microsoft’s free Windows HDR Calibration app can then be used to adjust the brightness. On a monitor with modest peak brightness, the result may be disappointing: in this case, leaving it disabled is a perfectly valid choice.
The checklist in summary
- Monitor connected to the graphics card, preferably via DisplayPort.
- Maximum refresh rate selected in Windows’ advanced display settings.
- VRR enabled in the monitor’s menu, the driver, and Windows.
- Frame rate limit set just below the monitor’s refresh rate.
- Overdrive set to the intermediate setting, HDR enabled according to the monitor’s capabilities.
These settings cost nothing and only need to be done once. If you are still unsure about choosing a monitor, our article on choosing a gaming PC based on monitor resolution completes this guide. And for a DSGate PC ordered with a monitor, our team can tell you which port to use for your configuration via message.
Sources: Pureinfotech – enable variable refresh rate under Windows 11; Pureinfotech – enable G-Sync under Windows 11; Windows Digitals – enable G-Sync or FreeSync under Windows 11.